ProductsIn assortment of our products - we provide you with a wide range of high-quality silicone products for civil and industrial use

more
ProductionOn our manufacture we use only advanced technology and innovation to achieve high quality products

more
GalleryGallery of objects where we picked up the best and you should pay attention and make the right choice

more
JobsOur company is always looking for professionals in their work, who are ready to prove it

more

PRIMER COAT GF-0119
The suspension of pigments and fillers in alkyd varnish with the addition of solvents, drier and stabilizer.

click here to learn more

PRIMER COAT GF-021
The suspension of pigments and fillers in alkyd varnish with the addition of solvents, drier and stabilizer.

click here to learn more

ENAMEL PF-101 K

The suspension of pigments and fillers in alkyd varnish, modified with silicone.

click here to learn more

ENAMEL PF-115 K

The suspension of pigments and fillers in alkyd varnish, a modified silicone.

click here to learn more

 

 

PRIMER COAT GF-0119
The suspension of pigments and fillers in alkyd varnish with the addition of solvents, drier and stabilizer.

Application

For priming metal and wood surfaces before coating with various enamels, as well as temporary corrosion protection in a single layer coating of large metal structures on the period of installation and storage.

Characterized by two possible modes of drying; the film formed with primer coating is resistant to temperature fluctuations from – 50ºC to 60ºC.

Color: red-brown.

Surface preparation

Remove any dust, dirt, grease, rust, bloated and exfoliated old paint and other contaminants by any mechanical method.
Degrease by wiping the surface with hair brushes, cloth soaked in gasoline, white spirit, solvent etc.

Primer preparation
• mix thoroughly;
• dilute if necessary to working viscosity with solvent, solvent SR-2 (or mixture of solvent with white spirit in the ratio 1:1).

Coating

Apply on prepared surface. Paint only after primer coat completely dry to prevent pigments migration to enamel. Before application of nitro enamel on surface coated with primer, keep the coating in natural conditions at a temperature of 18-22ºC for at least 6 days.

Application methods
• with brush; • by jet flow coating; • by dipping;• spraying.

Material consumption: 60-100 g/m².

Safety information
The primer coating in cured state is not toxic and fireproof.
Shelf life: 6 months.

 

Physical-and-chemical characteristics

Viscosity by viscometer В3-246 with nozzle diameter 4 mm, s.
45
Drying time to degree 3 at temperature:
• (18 – 22)ºС
• (100 – 110)°С

 

 

Not more than 12 hours
Not more than 35 min.

Resistance to static action at temperature (20+-2)°С, h:
• nitro enamel
• 3% – solution of sodium chloride
• mineral oil
• water

 

Passed the test
48
48
72

Mass fraction of solids, % 53-59
Coating adhesion, points 1
Milling degree, um 40

Coating strength, measured by pendulum type M-3, conventional units, at least

0,35
Bending elastisity, mm 1
Film impact strength, cm 50

PRIMER COAT GF-021
The suspension of pigments and fillers in alkyd varnish with the addition of solvents, drier and stabilizer.

Application

Intended for priming metal and wood surfaces for coating various enamels, characterized by two possible modes of drying; the film formed with primer coating is resistant to temperature fluctuations from – 45ºC to 60ºC.

Characterized by two possible modes of drying; the film formed with primer coating is resistant to temperature fluctuations from – 50ºC to 60ºC.

Color: red-brown.

Surface preparation

Remove any dust, dirt, grease, rust, bloated and laminated old paint and other contaminants by any mechanical method.
Degrease by wiping the surface with hair brushes, cloth soaked in gasoline, white spirit, solvent etc.

Primer preparation
• mix thoroughly;
• dilute if necessary to working viscosity with solvent, xylol (or mixture of one of above solvents with white spirit 1:1), solvents RS-2,649,650; РЭ-4В – when applying in electrostatic field. Do not dilute with other solvents, not provided here and do not mix with other paints.

Coating

Apply on prepared surface. Paint only after primer coat completely dry to prevent pigments migration to enamel. Before application of nitro enamel on surface coated with primer, keep the coating in natural conditions at a temperature of 18-22ºC for at least 6 days.

Application methods
• with brush; • by jet flow coating; • by dipping; • spraying.

Material consumption: 60-100 g/m².

Safety information
The primer coating in cured state is not toxic and fireproof.
Shelf life: 6 months.

Physical-and-chemical characteristics

 

The viscosity by viscometer ВЗ-246 with nozzle diameter 4 mm, с
45
Drying time to degree 3 at temperature:
• (18 – 22)ºС
• (100 – 110)°С

 

 

Not more than 12 hours
Not more than 35 min.

Resistance to static action at temperature (20+-2)°С, h:
• nitro enamel withstand, 3% solution of sodium chloride
• mineral oil

 


24
48

Mass fraction of solids, % 54-60
Coating adhesion, points 1
Milling degree, um 40

Coating strength, measured by pendulum type M-3, conventional units, at least

0,35
Bending elastisity, mm 1
Film impact strength, cm 50

ENAMEL PF-101 K

The suspension of pigments and fillers in alkyd varnish, modified with silicone.

Application

For external and internal surfaces of brick, concrete, cement, asbestos, wood and metal products in the construction of housing, industrial buildings and in the industry.

The enamel has high frost, moisture resistance, resistance to direct sunlight; it is well proved for use in buildings with high humidity as the modification with silicone prevents the growth of microorganisms and mildew.

Color

Wide color range is available. It is possible to select colors by RAL or customer sample.

Appearance of enamel film

After drying, the coating must be smooth, uniform, semigloss or matte, with no foreign inclusions; a slight shagreen is allowed.

Surface preparation

Clean and degrease the surface.

Enamel preparation

• thoroughly mix the enamel;

• dilute if necessary to the desired viscosity with xylol, solvent, white spirit or the mixture of white spirit with butyl acetate in the ratio of 1:3.

Coating

Apply the enamel on primed or not primed surface.

The recommended primer coats are alkyd GF-021 or PF-020.

Application methods

• hand method (with brush or roller);

spraying (aerial or airless).

Material consumption on the primed flat surface – one layer from 120 g/m2.

Safety information

The enamel film in cured state is not toxic.

Shelf life: 12 months.

Physical-and-chemical characteristics

Funnel viscosity by viscometer ВЗ-246, с, at temperature (20±5)°С
for enamel base
80-120
Mass fraction of solids in the enamel base, %

55

Drying time to degree 3 at temperature (20±5)°С, h, no more

36

Film hardness by pendulum TML (pendulum А), relative units, at least 0,10
Bending elasticity of enamel coating, mm, no more 1
Coating impact strength, on the device U-1a сm, at least 40

Coating adhesion, points, no more

1
Resistance to static action of water at a temperature of (20 ± 2)°C,
h, at least
24
Spreading rate of enamel, g/m2, no more 120

 

ENAMEL PF-115 K

The suspension of pigments and fillers in alkyd varnish, a modified silicone.

Application

For protective and decorative coatings in the home, construction and industry of interior and exterior surfaces of metal and wood products, brick, concrete, cement, asbestos, pre-cleaned and degreased.

The coating has high performance characteristics – excellent weather resistance, frost, moisture resistance, resistance to direct sunlight.

Appearance of enamel film

After drying, the coating must be smooth, homogeneous, semi-matt or satin, gloss, no foreign matter is allowed a small shagreen

Color

Wide color range is available. It is possible to select colors by RAL or customer sample.

Surface preparation

Clean and degrease the surface.

Enamel preparation

• thoroughly mix the enamel;

• dilute if necessary to the desired viscosity with xylol, solvent, white spirit or the mixture of white spirit with butyl acetate in the ratio of 1:3.

Coating

Apply the enamel on primed or not primed surface.

The recommended primer coats are alkyd GF-021 or PF-020.

Application methods

• hand method (with brush or roller);

• spraying (aerial or airless).

Material consumption on the primed flat surface – one layer from 100 g/m2.

Safety information

The enamel film in cured state is not toxic.

Shelf life: 12 months.

Physical-and-chemical characteristics
Gloss by photoelectric gloss meter, %, at least
50
Drying time, h,:
• to degree 1
• to degree 3

 

12

24

 

Funnel viscosity, с

80-120

Mass fraction of solids, % 60-66
Dilution degree to viscosity 28-30, %, no more 20
Milling degree, um, no more 25

Bending elasticity, mm, no more

1
Coating impact strength, см, at least 40
Coating adhesion, points, no more 1
The resistance to static action of 0,5 % solution of detergent, min,
at least
15
The resistance to static action of transformer oil, h, at least 24

 

 

 

Useful information
The main applications of silicon organic resins

The main applications of silicon organic resins

Silicone additives to concrete

Silicone additives to concrete

contacts  (+36) 56 52 11 15
© 2017 Hungarian Silicones. All rights reserved
Copying material from this site is prohibited
Created by MSGROUP
return_links(); ?>