ProductsIn assortment of our products - we provide you with a wide range of high-quality silicone products for civil and industrial use

more
ProductionOn our manufacture we use only advanced technology and innovation to achieve high quality products

more
GalleryGallery of objects where we picked up the best and you should pay attention and make the right choice

more
JobsOur company is always looking for professionals in their work, who are ready to prove it

more

WATER-DISPERSED PAINT VD-AK-111

Based on copolymer acrylate dispersion.

Application

• The paint is designed for interior and exterior painting of buildings and structures on brick, concrete, plastered, wood and other porous surfaces (except floors) on the primed surface of the metal, old coatings.

• The coating has a smooth uniform matte surface. Produced fully ready for use. Resistant to mild wet wiping.

Color: white. White paint can be diluted with water based pigments.


Surface preparation: Clean and degrease the surface.

Paint preparation

• mix thoroughly;

• if necessary, dilute with water to the desired viscosity.

Coating

Apply one or two layers of paint on primed or not primed surface.

The paint VD - AK -111 diluted with water in ratio 1:10 can be used for primer coating.

Application methods

• manual (with brush or roller);

• spraying (aerial or airless).

Material consumption

• per one layer 110 – 150 g/m2;

• per two layers 250 – 300 g/m2.

Safety information

In the cured state, the film of paint is non-toxic and fireproof.

Shelf life: 12 months.

WATER-DISPERSED PAINT VD-KCH-183

Based on water dispersions of synthetic polymers.

Application

• The paint is designed for interior and exterior painting of buildings and structures on brick, concrete, plastered, wood and other porous surfaces (except floors) on the primed surface of the metal, old coatings.

• The coating has a smooth uniform matte surface. Produced fully ready for use.

Color: white. White paint can be diluted with water based pigments.

Surface preparation: Clean and degrease the surface.

Paint preparation

• mix thoroughly;

• if necessary, dilute with water to the desired viscosity.

Coating

Apply one or two layers of paint on primed or not primed surface.

The paint VD-KCH-183  diluted with water in ratio 1:10 can be used for primer coating.

Application methods

• manual (with brush or roller);

• spraying (aerial or airless).

Material consumption

• per one layer 110 – 150 g/m2;

• per two layers 250 – 300 g/m2.

Safety information

In the cured state, the film of paint is non-toxic and fireproof.

Shelf life: 12 months.

 

Physical-and-chemical characteristics


VD-AK-111 VD-KCH-183
Viscosity by viscometer В3-246 with nozzle diameter 4 mm,s.
45
45
Mass fraction of solids, %
53-59
54-60
Drying time to degree 3 at temperature:
• (18 – 22)ºС
• (100 – 110)°С
Not more than 12 hours
Not more than 35 min.
Not more than 24 hours
Not more than 35 min
Coating resistance to a static actionat temperature (20+-2)°С, h:
1
1
Milling degree, um
40
40
Coating strength, measured by pendulum type M-3, conventional units, at least
0,35
0,35
Bending elastisity, mm
1
1
Coating strength at temperature (20+-2)°С to a static action, h:
• nitro enamel
• 3% – solution of sodium chloride
• mineral oil
• water
Passed the test
48
48
72

 

24
24
48
-
Film impact strength, cm
50
50

 

Useful information
The main applications of silicon organic resins

The main applications of silicon organic resins

Silicone additives to concrete

Silicone additives to concrete

contacts  (+36) 56 52 11 15
© 2017 Hungarian Silicones. All rights reserved
Copying material from this site is prohibited
Created by MSGROUP
return_links(); ?>